Need to change the battery from a Rmono? Check out our how-to guide below:
Change the battery
Change the battery of your Rmono is just five simple steps:
- Take the device out of the cradle
- Carefully remove the four screws using a PZ2 screw driver and remove the back cover
- Replace the battery with a new one and make sure the positive (+) and negative (-) terminal are placed correctly
- Place back the cover and re-insert the four screws
- Check if you see a green/blue light in the circle for a duration of 5 seconds
- Green/blue light is shown: Check the measurements in RmoniWeb
- Green/blue light is not shown: Use the RMA form to repair of replace the device
Note: We recommend using a SAFT 3,6V LiSOCL2 type (LS14500) battery as replacement
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article